CGPA to Percentage Converter

Convert CGPA to percentage using your university's formula, not a generic one.

Application forms ask for a percentage; your grade card shows a CGPA; and India has no single formula connecting the two. This converter applies the common university formulas and shows all of them side by side, so you can see how much the choice actually matters.

Your CGPA and university

Result

Fill in the fields above and your result will appear here.

What the CGPA to Percentage Converter does

The most widely used rule is CGPA × 9.5, which originated with CBSE grading and is accepted by many employers when nothing else is specified. Several universities publish their own: VTU and GTU commonly use (CGPA − 0.75) × 10 and (CGPA − 0.5) × 10 respectively, and the University of Mumbai uses a linear formula for some programmes.

At a CGPA of 8.2 those formulas produce results ranging from about 74% to 82%. When an eligibility cut-off sits at 60% or 75%, that spread decides outcomes — which is why the official conversion, not a convenient one, is the one to use.

How to use this tool

Enter your CGPA or SGPA exactly as printed on your grade card, including decimals.
Select your university's formula if it appears in the list. If not, choose Custom and enter the multiplier and offset from your regulations.
Read the headline result for your selected formula, then check the comparison table to see the full range.
If an application has a cut-off near your result, ask your examination cell for an official conversion certificate rather than relying on any calculator.

Formula and method

CBSE / general rule: Percentage = CGPA × 9.5 VTU style: Percentage = (CGPA − 0.75) × 10 Anna University style: Percentage = (CGPA − 0.5) × 10 Mumbai University style: Percentage = 7.1 × CGPA + 11 Direct scale: Percentage = CGPA × 10 4-point GPA: Percentage = GPA × 25

None of these is universally correct. They are conventions published or adopted by particular bodies, and your own regulations override all of them.

Worked example

Example: CGPA of 8.2

CGPA × 9.5 (CBSE rule)	77.90%
(CGPA − 0.75) × 10 (VTU style)	74.50%
(CGPA − 0.5) × 10 (Anna style)	77.00%
7.1 × CGPA + 11 (Mumbai style)	69.22%
CGPA × 10	82.00%

A spread of nearly 13 percentage points from the same grade card. For an application with a 75% cut-off, three of these formulas clear it and two do not.

What your result means

The result is only as authoritative as the formula behind it. If your university issues conversion certificates, that document is what an employer or admissions office will accept.

Division bands in India conventionally run: first division at 60% and above, second at 50–59%, third at 40–49%. Distinction is usually 75% and above. Several institutions apply their own bands.

If you land within a point or two of a cut-off, treat the number as provisional until the official conversion is confirmed. That is exactly the situation in which formula choice decides the outcome.

Important considerations

For higher study abroad, most universities prefer the transcript and the grading key over any converted percentage. Send both.
Some Indian government recruitments specify the conversion to be used, and it may not be your university's. Read the notification.
SGPA converts the same way as CGPA under these formulas, but a single-semester percentage is rarely what an application wants.
Where your grade card already prints a percentage, use that. A calculated conversion never overrides a printed one.
Never inflate a converted percentage on an application. Verification failures are treated as misrepresentation, not as a rounding difference.

Limitations of this tool

It applies published conventions and cannot know which formula your specific programme and admission year uses.
Universities occasionally revise their conversion formula between batches, and older graduates may be governed by a superseded rule.
Conversions from a 4-point scale are approximate. Institutions using them usually expect the transcript key instead.

Frequently asked questions

Is CGPA × 9.5 the official formula in India?

It is a CBSE convention that many institutions and employers accept, but it is not a national standard. Your university's own regulations take precedence, and several publish a different formula.

Which formula should I use on a job application?

The one your university officially publishes. If the employer specifies a formula in the job advertisement, use theirs. If neither exists, the 9.5 rule is the safest default — and say which formula you used.

How do I get an official conversion certificate?

Apply to your examination cell or controller of examinations. Most Indian universities issue one on request, sometimes for a small fee. Admissions offices abroad frequently ask for it specifically.

Can I use the formula that gives the highest percentage?

No. Applications are verified against transcripts, and using a formula your university does not apply is a misrepresentation. Use the official conversion even when it is less flattering.